Magnafloc 455 Alternative Supply — Cationic PAM Selection and Trial Route
ChinaPAM accepts a Magnafloc 455 alternative-supply enquiry and can quote a controlled cationic-powder selection programme once the duty and current incumbent identity are confirmed. A current Solenis LLC SDS (R1200574, 2024-09-20) confirms the product as an off-white odourless powder flocculant — it does not state ionic type, MW or charge. A public patent table from EP 3019271 B1 — published 2021-06-23, citing work with priority back to 2013 — lists Magnafloc 455 as cationic, very-low charge and very-high molecular weight in that historical research context; that table is not a current Solenis specification. No ChinaPAM grade sits at the same combination of very-low charge and very-high MW. C8008 is the closest charge-direction anchor; C8055 and C8006 are the closest MW-direction anchors. Both axes require a same-material trial to resolve, not a single-label choice. Send the Magnafloc 455 label and your application details and ChinaPAM will open the enquiry.
Supply Route Comparison
Published reference data and the ChinaPAM route for Magnafloc 455
Magnafloc is a trademark of Solenis and/or its affiliates. ChinaPAM is an independent manufacturer and is not affiliated with, endorsed by, licensed by or a distributor for Solenis. The grade name is used only to identify the product a buyer is comparing. Sources cited on this page: a current Solenis SDS (R1200574, 2024-09-20) and European patent EP 3019271 B1 (EPO, published 2021-06-23) — they are not ChinaPAM documents. Our products are separately branded ChinaPAM grades and are not licensed copies.
| Parameter | ChinaPAM Supply Route | Magnafloc 455 |
|---|---|---|
| Product form | Cationic PAM powder — ChinaPAM supply range; specific grade confirmed after trial | Off-white odourless powder flocculant — current Solenis SDS R1200574 (2024-09-20) |
| Solution behaviour | Viscous solution after make-down; handling per current ChinaPAM TDS | Forms a viscous solution in water — current Solenis SDS Section 9 |
| Solution pH | Confirmed against quoted ChinaPAM grade at quotation | 3.5–4.5 at 10 g/L — current Solenis SDS R1200574, Section 9 |
| Charge band (historical) | C8008 charge-side anchor (low charge); C8055/C8006 MW-side anchors (very-high charge — opposite direction) | Very-low — EP 3019271 B1, paragraph [0048] historical patent table; not current specification |
| MW band (historical) | C8055/C8006 MW-side anchors (very-high MW); C8008 (medium MW — opposite MW end) | Very-high — EP 3019271 B1, paragraph [0048] historical patent table; not current specification |
| Make-down | ChinaPAM powder preparation runs at a 1–3 g/L recommended window, 5 g/L maximum, and no longer than 60 minutes at working concentration. Preparation concentration is not process dosage. | Apply ChinaPAM TDS make-down instructions for the selected grade; do not copy competitor parameters |
| Safety notes | Handle per current ChinaPAM SDS for the selected grade; control dust and wet-surface conditions | Dust hazard, slippery wet surfaces — current Solenis SDS R1200574, Sections 6–7 |
Specifications
| Incumbent Model | Solenis Magnafloc 455 (material 933311; keep separate from 380, 504 and other Magnafloc pages) |
| Current SDS Identity | Solenis LLC SDS R1200574, version 1.2, revision 2024-09-20: off-white odourless powder flocculant, pH 3.5–4.5 at 10 g/L, viscous solution in water |
| Product Form (SDS) | Off-white odourless powder, flocculating agent use — current Solenis SDS R1200574 (2024-09-20); SDS does not state ionic type, MW or charge |
| Ionic Type / Charge / MW (Patent) | Cationic / very-low charge / very-high MW — EP 3019271 B1, paragraph [0048] table; historical patent context, not current Solenis specification |
| ChinaPAM Charge-Side Anchor | C8008 — medium-MW, low-charge; closest charge-direction anchor only; MW is not a match |
| ChinaPAM MW-Side Anchors | C8055, C8006 — very-high-MW; opposite charge end (very-high charge); charge is not a match |
| Route Boundary | Grade-selection screening — no public primary/backup named; test on same material determines route |
Key Features
- Current Solenis LLC SDS (R1200574, 2024-09-20) confirms the exact product identity: powder flocculant, pH 3.5–4.5 at 10 g/L
- EP 3019271 B1 paragraph [0048] exact-name table places Magnafloc 455 as cationic, very-low charge, very-high MW — documented as historical patent context
- The historical patent profile (very-low charge / very-high MW) is the opposite charge extreme from the ChinaPAM MW anchors (C8055/C8006 at very-high charge)
- No ChinaPAM grade holds both very-low charge and very-high MW; C8008 and C8055/C8006 are orthogonal anchors in separate directions
- SDS safety data: powder dust formation and slippery-wet-surface hazards require appropriate make-down and handling controls
- Magnafloc 455 has a documented very-low charge profile (patent) while Magnafloc 504 has a documented high-charge distributor-described profile — handling them in separate enquiries avoids combining two opposite charge brackets into a single selection programme
- Same-material trial required before route is committed; current incumbent TDS/SDS requested from the buyer
Applications
- Buyer-confirmed cationic PAM powder flocculation duties where the full Magnafloc 455 label is the incumbent and the historical very-low-charge / very-high-MW patent profile provides initial screening framing only — the patent's description is a historical research context, not a universal current application claim
- Procurement comparing a confirmed Magnafloc 455 purchase requirement with the current Solenis SDS as the base document
- Buyer-confirmed clarification or dewatering duties requiring separate charge-side and MW-side screening — the held sources do not establish a universal current application for these process types; each axis must be confirmed independently before a route is named
- Water-treatment or mineral-processing circuits where a buyer confirms Magnafloc 455 as the current incumbent — the application duty itself is not established by the held sources; a current incumbent TDS or SDS is requested to frame the screening programme
Get a Quote for Magnafloc 455 Alternative Supply
Send the Magnafloc 455 label or a bag photo. Attach the current incumbent SDS or TDS if you hold one. State your duty — sludge type, solids load, clarification or dewatering — and the make-down equipment. That is enough to open the enquiry.
Related Articles
Supply answer: cationic screening programme, no pre-named grade
ChinaPAM accepts a Magnafloc 455 alternative-supply enquiry and can open a cationic-powder screening programme. No public primary or backup is named because the historical patent table places Magnafloc 455 at very-low charge — the opposite end of the charge spectrum from ChinaPAM's very-high-MW cationic grades (C8055, C8006). C8008 is the nearest charge-direction anchor (low charge, medium MW); C8055 and C8006 are the nearest MW-direction anchors (very-high MW, very-high charge). Selecting from one axis alone can preserve charge but miss MW, or preserve MW but overshoot charge.
The buyer's task is to confirm the current incumbent documents and run the charge-direction anchor and the MW-direction anchor on the same representative material at matched dose, then fix the route from the measured results.
Price, stock and lead time belong to the quotation.
What the current Solenis SDS establishes and what requires the patent table
The current Solenis LLC SDS R1200574 (version 1.2, revision 2024-09-20) is the authoritative document for exact product identity and form: material 933311, off-white odourless powder, pH 3.5–4.5 at 10 g/L, viscous solution in water, flocculating agent use. The SDS does not state ionic type, molecular weight or charge.
EP 3019271 B1 (European Patent Office, published 2021-06-23, Amcol International Corporation as proprietor, priority from 2013) contains an exact-name product table at paragraph [0048] that lists Magnafloc 455 as cationic, very-low charge and very-high MW. That table is historical product-profile context from a research-and-patent filing, not a current Solenis PDS. The ionic type and directional profile can be used to anchor the screening bracket; current charge and MW windows require a current issuer product document to verify.
Keep Magnafloc 455 and 504 as separate enquiries. A public joint competitor page lists 380/455/504 as a combined cationic set, but that grouping collapses the different charge profiles of those grades. The 455 historical profile (very-low charge per the patent) and the 504 current distributor-described profile (high charge per Quadra) are at opposite ends of the cationic range — a buyer confirming duty for one grade should not be placed in a selection programme designed for the other.
Three facts the sources actually establish
| Fact | Source and locator | What it does not establish |
|---|---|---|
| Magnafloc 455 FLOCCULANT, material 933311, is identified for use as a flocculating agent. | Current Solenis LLC SDS R1200574, version 1.2, revision 2024-09-20; PDF page 1, identification and recommended use. | Does not state ionic type, MW or charge. |
| The product is an off-white, odourless powder that forms a viscous solution in water; pH 3.5–4.5 at 10 g/L. | Current Solenis SDS R1200574; PDF pages 4–5, Section 9. | pH measured at 10 g/L; SDS does not state ionic type, MW or charge. |
| An exact-name table in EP 3019271 B1 identifies Magnafloc 455 as cationic with very-low charge and very-high molecular weight. | EP 3019271 B1, published 2021-06-23, EPO; PDF page 10, paragraph [0048] product table. Historical patent context; not a current Solenis specification. | Does not establish current Solenis charge/MW window, current availability, pricing or cross-vendor equivalence. |
Two failure modes and the check that catches each one
| Trigger | Consequence | Verification step |
|---|---|---|
| A route is chosen from one axis only — charge-side without MW check, or MW-side without charge check. | C8008 is only a charge-direction anchor at medium MW; C8055/C8006 are only MW-direction anchors at very-high charge. Selecting from one axis can preserve charge but miss the MW requirement, or match MW but overshoot charge significantly. | Confirm the current incumbent PDS/TDS if available. Test the charge-direction anchor and the MW-direction anchors on the same representative material and fix the route from measured floc, drainage and cake results. |
| Dust control or uncontrolled transfer shear during make-down is mistaken for a chemistry mismatch. | The current SDS identifies powder dust hazard and slippery wet-surface conditions. Fisheyes or damaged floc from poor wetting can fail the comparison even when the polymer profile is close. | Record make-down concentration, wetting method, maturation time, solution age, impeller speed and transfer conditions. Eliminate handling variables before attributing a result to chemistry. |
Intake, trial design and acceptance metrics
Useful intake: full Magnafloc 455 label and current incumbent SDS/TDS if the buyer holds one; duty (clarification or dewatering); solids load, feed source, pH, conductivity, water hardness and current throughput; incumbent active dose; make-down equipment and concentration; target clarity or cake solids; trial quantity and destination.
ChinaPAM powder preparation runs at a 1–3 g/L recommended window, 5 g/L maximum, and no longer than 60 minutes at working concentration. Preparation concentration is not process dosage.
Trial design: run a documented dose ladder on the same representative material using identical make-down concentration, mixing geometry and agitation conditions for every candidate run. After selecting a leading route from those results, repeat it on an adverse but real feed or water condition supplied by the buyer — higher solids load, seasonal feed change or off-spec pH — before committing to scale-up. Do not copy any competitor preparation ranges into ChinaPAM instructions.
Agree acceptance metrics before the first run: clarity or turbidity; settling or filtration rate; cake solids or underflow concentration as applicable; active dose; throughput; floc shear tolerance; solution operability and pumpability. Buyer-defined targets take precedence.
Current price, stock status, lead time, applicable TDS and sample arrangements are confirmed in the quotation. Batch-specific COA terms are confirmed with the shipment.
Brand Equivalents & Replacements
ChinaPAM accepts a Magnafloc 455 alternative-supply enquiry and can quote a cationic selection programme after the incumbent identity and duty are confirmed. No ChinaPAM grade combines very-low charge with very-high MW; the selection and trial determine the route. Neither C8008 nor C8055/C8006 is a drop-in or a performance-guaranteed replacement.
| Brand | Grade | Notes |
|---|---|---|
| Solenis Magnafloc | 455 | Current Solenis LLC SDS R1200574 (2024-09-20): material 933311; off-white odourless powder flocculant; pH 3.5–4.5 at 10 g/L; viscous solution in water. EP 3019271 B1 paragraph [0048] (published 2021-06-23): historical patent exact-name table — cationic, very-low charge, very-high MW. Historical context; not a current Solenis product specification. ChinaPAM: no grade combines both axes; C8008 is the charge-direction anchor; C8055/C8006 are the MW-direction anchors. Grade-selection screening; trial determines route. |
Need a replacement for a different grade? Contact us with your current product specs.
Frequently Asked Questions — Magnafloc 455 Alternative Supply — Cationic PAM Selection and Trial Route
Can ChinaPAM supply for a Magnafloc 455 requirement?
Yes — ChinaPAM accepts the enquiry and can open a cationic-powder selection programme. No specific grade is pre-named because the historical very-low charge / very-high MW profile cannot be satisfied simultaneously from the current ChinaPAM product range. The programme uses C8008 as the charge-direction anchor and C8055/C8006 as the MW-direction anchors; trial on the same material determines the route.
The EP 3019271 B1 patent lists Magnafloc 455 as very-low charge and very-high MW. Is that the current product specification?
No. That table appears in a 2013-priority patent published by the EPO in 2021 as a product-comparison context in the research record. It is historical product-profile information, not a current Solenis PDS or TDS. The current Solenis SDS (R1200574, 2024-09-20) confirms only the powder form and flocculating-agent use — it does not state ionic type, MW or charge. A current issuer product-profile document would be needed to verify the present specification.
Why not just use C8055 or C8006 as they are very-high MW?
Because C8055 and C8006 sit at very-high charge — the opposite end of the charge spectrum from the very-low charge position recorded in the patent table. An MW-only selection ignores the charge requirement and can produce a route that over-charges the suspension or increases dose to the point where restabilisation occurs.
How do the documented profiles of Magnafloc 455 and 504 differ?
Magnafloc 455 has a historical very-low-charge profile recorded in EP 3019271 B1. Magnafloc 504 has a current distributor-described high-charge profile from Quadra (which names Solenis as supplier). They are at opposite ends of the cationic charge range. A buyer with a confirmed 455 requirement should send that label; a buyer with a confirmed 504 requirement should send that label. Each is a separate enquiry.
When should a Magnafloc 455 alternative-supply enquiry proceed, and when should it stop?
Proceed when the full Magnafloc 455 identity is locked from the current incumbent label or SDS, and when a tested ChinaPAM route meets the process, handling and preparation targets on the same representative material. If the historical very-low-charge / very-high-MW window cannot be reproduced on the buyer's feed, or if the incumbent identity remains unresolved, retain the enquiry as a family screening programme rather than naming a route, or stop rather than committing a grade that has not been trial-confirmed.
What is confirmed in the quotation, and what is not stated here?
Current price, stock status, lead time, applicable TDS and sample arrangements are confirmed in the quotation. Batch-specific COA terms are confirmed with the shipment.
Trademark notice. Magnafloc 455 and all other third-party product and brand names on this page are trademarks or registered trademarks of their respective owners. Henan Jinghua New Material Technology Co., Ltd. is not affiliated with, endorsed by, sponsored by or authorised by those owners, and no such relationship is implied. Those names are used here for the sole purpose of identifying the products our grades are compared against, which is necessary to describe what we supply. Our products are separately branded ChinaPAM grades and are not licensed copies. Third-party facts on this page are attributed separately to the current Solenis SDS for identity and physical properties and to EP 3019271 B1 for the historical charge and molecular-weight descriptors; the patent statements are not presented as current Solenis specifications. Performance on your process should be confirmed by jar test or CST test before any change of supply.