FLOPAM FA 920 VHM Equivalent: Nonionic PAM Supply Route
ChinaPAM supplies nonionic PAM powder with grade 1003 as the starting same-ion-type route for FLOPAM FA 920 VHM duty. Grade 1003 sits at Low molecular weight on our scale while SNF historically lists FA 920 VHM at Ultra High molecular weight, so the trial checks whether the available nonionic route meets your process goal. Ask for current pricing or sample options using the grade name, a bag-label photo or your purchasing requirement; process details can follow.
Supply Route Comparison
Published reference data and the ChinaPAM route for SNF FLOPAM FA 920 VHM
Competitor reference: SNF SAS Catalogue 2007 Poudres, pages 30. Historical indicative values, not current contractual specifications. Each supplier sets its own qualitative bands. FLOPAM is a trademark of SNF; ChinaPAM supplies its own products and is not affiliated with or endorsed by SNF.
| Parameter | ChinaPAM Supply Route | SNF FLOPAM FA 920 VHM |
|---|---|---|
| Polymer type | Nonionic PAM powder | Nonionic PAM powder |
| Charge band | Nonionic (our scale) | Nonionic (SNF 2007 p30) |
| Molecular-weight band | Low (our scale) | Ultra High (SNF 2007 p30) |
| Brookfield at 5 / 2.5 / 1 g/L | Confirm applicable grade data | Approximately 220 / 60 / 20 cps (SNF 2007 p30) |
| Recommended make-up | 1-3 g/L | 5 g/L (SNF 2007 p30) |
| Maximum make-up | 5 g/L | 15 g/L (SNF 2007 p30) |
| Dissolution | Within 60 min at working concentration | 300 min in DI water at 5 g/L and 25 C (SNF 2007 p30) |
Specifications
| Primary supply grade | 1003 |
| Our polymer | Nonionic PAM powder |
| Our charge band | Nonionic (ChinaPAM scale) |
| Our molecular-weight band | Low (ChinaPAM scale) |
| Our recommended make-up | 1-3 g/L |
| Our maximum make-up | 5 g/L |
| Our dissolution | Within 60 min at working concentration |
Key Features
- 1003 same-type trial route with descriptor differences disclosed
- Exact FA 920 VHM identity and historical source retained
- Preparation and delivered dose checked on actual feed
Applications
- Alternative supply screening for buyer-specified FLOPAM FA 920 VHM duty
- Make-up and dosing-system checks during an incumbent polymer changeover
- Feed-specific clarification, settling and downstream dewatering trials
Get a Quote for SNF FLOPAM FA 920 VHM Alternative Supply
Start with the grade name, a bag-label photo or your purchasing requirement. We can discuss current pricing and sample options now; process details can follow.
What the VHM suffix identifies
SNF SAS Catalogue 2007 Poudres, page 30, lists FA 920 VHM as nonionic powder at Ultra High molecular weight. Its indicative Brookfield readings are 220 / 60 / 20 cps at 5 / 2.5 / 1 g/L. Recommended make-up is 5 g/L, maximum 15 g/L, and dissolution is 300 minutes in deionized water at 5 g/L and 25 degrees C. These are historical indicative figures, not current contractual specifications.
The bare FA 920 entry on the same page is High molecular weight, with an 80 / 20 / 10 cps profile and 120-minute dissolution under the stated conditions. The FA 920 VHR entry also differs from VHM. Confirm the full suffix instead of treating all FA 920 bags as one preparation recipe.
Our nonionic supply route
1003 is the only nonionic powder in the current ChinaPAM 26-grade table. Grade 1042 is anionic; it must not be presented as a second nonionic option. Our Low molecular-weight band and SNF's Ultra High description do not establish equivalent performance, and the two suppliers' bands are not a common numerical scale.
Prepare our powder at 1-3 g/L, maximum 5 g/L, with dissolution within 60 minutes at working concentration. Confirm candidate performance using your actual feed and measured dose. A source profile alone cannot establish settling, clarification or dewatering results.
Two preparation risks to check
Suffix and maturation: carrying the bare FA 920 120-minute schedule into the VHM entry overlooks its 300-minute reference. Check solution quality and complete maturation before comparing candidate performance; do not compensate for unprepared incumbent polymer merely by increasing the dosing pump setting.
Concentration and delivery: the incumbent's published maximum of 15 g/L is not our preparation limit. Do not copy that recipe to 1003, whose maximum is 5 g/L. If the working concentration changes, recalibrate volumetric delivery and calculate actual polymer mass so that a dilution change is not mistaken for a performance difference.
Request a nonionic supply comparison
Send your exact incumbent suffix, treatment objective, make-up concentration, maturation time, dosing rate and monthly quantity. We will discuss 1003, sample arrangements and applicable product documents.
Dosage Guide
Prepare our powder at 1-3 g/L, maximum 5 g/L, with dissolution within 60 minutes at the working concentration. Make-up concentration is different from the treatment dose. Establish the dose on your actual feed and verify measured polymer delivery.
Frequently Asked Questions — FLOPAM FA 920 VHM Equivalent: Nonionic PAM Supply Route
What supply route can I discuss for FLOPAM FA 920 VHM duty?
ChinaPAM supplies nonionic PAM powder with grade 1003 as the starting same-ion-type route for FLOPAM FA 920 VHM duty. Grade 1003 sits at Low molecular weight on our scale while SNF historically lists FA 920 VHM at Ultra High molecular weight, so the trial checks whether the available nonionic route meets your process goal. Ask for current pricing or sample options using the grade name, a bag-label photo or your purchasing requirement; process details can follow.
What must I check before changing supply?
Suffix and maturation: carrying the bare FA 920 120-minute schedule into the VHM entry overlooks its 300-minute reference. Check solution quality and complete maturation before comparing candidate performance; do not compensate for unprepared incumbent polymer merely by increasing the dosing pump setting.
What information should I send for a quotation?
Start with the grade name, a bag-label photo or your purchasing requirement. We can discuss current pricing and sample options now; process details can follow.
Related Products
Trademark notice. SNF FLOPAM FA 920 VHM and all other third-party product and brand names on this page are trademarks or registered trademarks of their respective owners. Henan Jinghua New Material Technology Co., Ltd. is not affiliated with, endorsed by, sponsored by or authorised by those owners, and no such relationship is implied. Those names are used here for the sole purpose of identifying the products our grades are compared against, which is necessary to describe what we supply. Our products are independently manufactured and are not licensed copies. Grade descriptors quoted for third-party products are taken from each manufacturer’s own published literature and follow that manufacturer’s own scale; we do not publish figures those manufacturers do not publish. Performance on your process should be confirmed by jar test or CST test before any change of supply.