FLOPAM AN 934 Equivalent — Medium-Charge Standard-MW Anionic PAM
ChinaPAM supplies an anionic PAM powder route for buyers replacing the bare SNF FLOPAM AN 934 grade. Start with CNfloc 1062; current pricing, a trial sample and the applicable product documents are available now.
Supply Route Comparison
Published reference data and the ChinaPAM route for SNF FLOPAM AN 934
Competitor facts are from SNF, FLOPAM Catalogue 2007, anionic powder standard range, PDF page 39. Values are indicative catalogue data rather than a contractual specification. Bare grades and SH, VHM, SD, HD, MPM or other suffix variants are separate entries and are not merged here.
| Parameter | ChinaPAM Supply Route | SNF FLOPAM AN 934 |
|---|---|---|
| Physical form | Anionic PAM powder | Anionic PAM powder — standard range |
| Starting route | CNfloc 1062; CNfloc K62 only under the stated trial condition | Bare FLOPAM AN 934 |
| Charge position | Selected within the ChinaPAM anionic range | Medium on the SNF published scale |
| Molecular-weight position | ChinaPAM grade scale; verified by trial | Standard on the SNF published scale |
| Brookfield at 5 / 2.5 / 1 g/L | Per the applicable document for the quoted grade | 1650 / 630 / 250 cps |
| Recommended / maximum preparation | 1–3 g/L / 5 g/L maximum | 3 g/L / 5 g/L maximum |
| Dissolution reference | Allow complete hydration under the quoted-grade instructions | 60 min at 5 g/L, 25°C, deionised water |
| Solution stability | Prepare fresh for the comparison trial | 1 day in deionised water |
| Storage / shelf-life reference | Per the applicable document for the quoted grade | 0–35°C / 24 months under the catalogue storage note |
| Packaging reference | 25 kg bag; export packing confirmed in quotation | 25 kg bags / 750 kg big bags |
Specifications
| ChinaPAM Starting Route | CNfloc 1062 |
| Trial-Controlled Backup | CNfloc K62 |
| Positioned Against | SNF FLOPAM AN 934 — bare grade |
| Product Form | Anionic polyacrylamide powder |
| SNF Charge / MW | Medium / Standard (SNF scale) |
| ChinaPAM Preparation | 1–3 g/L; maximum 5 g/L; allow full dissolution |
| Packaging | 25 kg PP woven bags + PE liner |
Key Features
- Named ChinaPAM route for the exact bare AN 934 purchase inquiry
- SNF page-39 profile locked to Medium charge and Standard MW
- Published viscosity profile: 1650 / 630 / 250 cps at 5 / 2.5 / 1 g/L
- Bare AN 934 kept separate from every suffixed grade
- Current price, trial sample and applicable documents available through one inquiry
Applications
- Medium-charge mineral thickener trials
- Tailings and process-water settling
- Industrial clarification with downstream shear
- Supplier changes where preparation torque is a constraint
Get a Quote for SNF FLOPAM AN 934 Alternative Supply
Tell us you use the bare FLOPAM AN 934 grade, plus quantity and destination. We can discuss the current ChinaPAM route, pricing, sample and applicable documents immediately.
Related Articles
What SNF Publishes for the Bare AN 934 Entry
Page 39 of the SNF FLOPAM 2007 catalogue places bare AN 934 in the standard anionic powder table at Medium charge and Standard molecular weight. It reports an approximate bulk density of 0.80 and Brookfield readings of 1650 cps at 5 g/L, 630 cps at 2.5 g/L and 250 cps at 1 g/L.
The same entry gives 3 g/L as the recommended preparation concentration, 5 g/L as the maximum, and 60 minutes dissolution at 5 g/L in deionised water at 25°C. It records one-day solution stability, 0–35°C storage, a 24-month shelf-life under the catalogue storage note, and 25 kg or 750 kg packaging. These facts identify the exact bare grade; they are not transferred to a suffixed entry.
Use Viscosity and Shear Response to Decide Whether the Backup Enters
Bare AN 934 is medium charge and Standard MW, yet it carries the highest 5 g/L viscosity among the medium-charge bare entries on page 39. A buyer moving supply therefore has two separate questions: is the charge position right, and does the plant need a higher-MW backup to hold floc after shear?
Start with CNfloc 1062. Add K62 only when the same-feed trial shows acceptable initial capture but poor settling rate or floc collapse after a controlled shear step. That result-based escalation keeps the route narrow while giving the buyer a technically meaningful second option.
Failure Modes That Can Make a AN 934 Trial Lie
A supplier-switch test is useful only when preparation and observation conditions are controlled. The checks below are tied to this grade position and give the operator a visible signal before a purchasing decision is made.
| Trigger | Consequence | What to observe |
|---|---|---|
| Selecting from the AN 934 family number while ignoring the suffix | Standard, SH and VHM duties are blended into one false specification | Exact label string and incumbent preparation viscosity |
| Skipping a controlled shear step | A fragile floc passes the beaker test but fails in the feed line or machine | Clarity and floc size before and after fixed high-speed mixing |
| Running a concentrated solution through undersized mixing equipment | Incomplete hydration looks like low molecular weight or poor chemistry | Mixer load, fisheyes and residual gel on a screen |
The Commercial Answer
ChinaPAM supplies the anionic powder route described on this page and can discuss current pricing, quantity, destination, sample arrangements and applicable documents immediately. The buyer does not need to complete a technical questionnaire before asking for a quotation.
The technical boundary is equally direct: ChinaPAM is an independent manufacturer and does not claim that CNfloc 1062 is identical to FLOPAM AN 934. The supply decision is confirmed by a controlled trial on the buyer's stream, using the incumbent result as the baseline.
Dosage Guide
Use the current bare FLOPAM AN 934 active dose as the first reference point. Prepare the quoted ChinaPAM powder at 1–3 g/L, allow complete hydration, and run a stepped side-by-side comparison on the same stream. Confirm the lowest stable dose that holds both separation rate and final clarity.
Frequently Asked Questions — FLOPAM AN 934 Equivalent — Medium-Charge Standard-MW Anionic PAM
Can ChinaPAM quote a supply route for bare FLOPAM AN 934 now?
Yes. ChinaPAM starts the inquiry with CNfloc 1062. Send the exact bare grade, quantity and destination for current pricing, a trial sample and the applicable documents. Suitability is confirmed on the buyer's process rather than promised from a cross-manufacturer label comparison.
Is bare AN 934 the same product as AN 934 SH or AN 934 VHM?
No. SNF publishes the bare, SH and VHM entries separately. The suffix changes the molecular-weight tier, viscosity and preparation demand. This page covers only the bare AN 934 entry on page 39.
Why are the two manufacturers’ charge and molecular-weight words not converted directly?
Low, medium, high and standard are supplier-specific qualitative bands. They are useful for choosing a starting route, but they are not common numerical specifications. ChinaPAM names its route and then settles the choice by a matched trial.
What should the comparison trial keep constant?
Use the same water or slurry sample, active dose basis, solution age, mixing energy and observation time. Record clarity or turbidity together with settling rate and the point where additional dose stops improving the result.
What information is enough to open the quotation?
The printed grade string FLOPAM AN 934, quantity and destination are enough to start. A label photo, current dose and preparation arrangement improve the trial plan but are not required before we discuss price and sample options.
Related Products
Trademark notice. SNF FLOPAM AN 934 and all other third-party product and brand names on this page are trademarks or registered trademarks of their respective owners. Henan Jinghua New Material Technology Co., Ltd. is not affiliated with, endorsed by, sponsored by or authorised by those owners, and no such relationship is implied. Those names are used here for the sole purpose of identifying the products our grades are compared against, which is necessary to describe what we supply. Our products are independently manufactured and are not licensed copies. Grade descriptors quoted for third-party products are taken from each manufacturer’s own published literature and follow that manufacturer’s own scale; we do not publish figures those manufacturers do not publish. Performance on your process should be confirmed by jar test or CST test before any change of supply.