FLOPAM AN 910 Equivalent — Low-Charge Anionic Polyacrylamide
ChinaPAM supplies anionic polyacrylamide positioned against SNF FLOPAM AN 910 for municipal water clarification, mining tailings thickening and industrial effluent settling. Free trial sample with jar test protocol, MOQ 500 kg.
Supply Route Comparison
Published reference data and the ChinaPAM route for SNF FLOPAM AN 910
| Parameter | ChinaPAM Supply Route | SNF FLOPAM AN 910 |
|---|---|---|
| Type | Anionic PAM powder | Anionic PAM powder |
| Charge (SNF published — all three entries) | Selected within our anionic range by jar test | Low |
| MW — AN 910 bare (SNF p.39) | Matched by jar test | Standard |
| MW — AN 910 VHM (SNF p.34) | Matched by jar test | Ultra High |
| MW — AN 910 SH (SNF p.35) | Matched by jar test | Very High |
| Brookfield @ 5 g/L — bare AN 910 | Per batch COA | 700 cps (SNF 2007 catalogue, p.39) |
| Brookfield @ 5 g/L — VHM | Per batch COA | 1,200 cps (SNF 2007 catalogue, p.34) |
| Brookfield @ 5 g/L — SH | Per batch COA | 950 cps (SNF 2007 catalogue, p.35) |
| Dissolution — bare AN 910 | 1–3 g/L, ≤60 min (our process) | 60 min @ 5 g/L, 25°C in DI water (SNF published, p.39) |
| Dissolution — VHM | 1–3 g/L, ≤60 min (our process) | 90 min @ 5 g/L, 25°C in DI water (SNF published, p.34) |
| Dissolution — SH | 1–3 g/L, ≤60 min (our process) | 60 min @ 5 g/L, 25°C in DI water (SNF published, p.35) |
| Appearance | White granular powder | Granular powder |
| MOQ | 500 kg | Set by regional distributor |
| Lead Time | 7–10 days ex-works | Set by regional distributor |
| Trial Sample | Free 5 kg with test protocol | Via distributor request |
Specifications
| Our Product | Anionic polyacrylamide powder |
| Positioned Against | SNF FLOPAM AN 910 (bare, VHM and SH variants) |
| Type | Anionic (partially hydrolysed polyacrylamide) |
| Charge Band (SNF) | Low (all three entries) |
| MW Tier | Standard (bare) / Ultra High (VHM) / Very High (SH) — entry-dependent |
| Appearance | White granular powder |
| Packaging | 25 kg PP woven bags + PE liner |
Key Features
- Covers bare AN 910 (Standard MW), AN 910 VHM (Ultra High MW) and AN 910 SH (Very High MW) — all Low charge
- Suffix handled explicitly: bare number, VHM and SH are three distinct SNF catalogue entries
- Free trial sample with jar test protocol before any bulk commitment
- Grade-level TDS and MSDS on request; relevant batch COA with each shipment — contact us to confirm applicable documentation for your order
- MOQ 500 kg, direct from factory with no distributor layer
Applications
- Municipal raw water clarification
- Mining tailings thickening and settling
- Industrial wastewater — steel, quarry, aggregate washing
- Raw water turbidity removal
- Dam decant and process water recovery
Get a Quote for SNF FLOPAM AN 910 Alternative Supply
Start with the grade name, a bag-label photo or your purchasing requirement. We can discuss current pricing and sample options now; process details can follow.
Related Articles
AN 910 SH — Very High MW, Low Charge
FLOPAM AN 910 SH appears in the SNF 2007 anionic powder catalogue (p.35, SH/SHU table) as Low charge with Very High molecular weight. Published Brookfield readings: 950 cps at 5 g/L, 450 cps at 2.5 g/L, 150 cps at 1 g/L. Recommended make-up concentration 5 g/L, maximum 10 g/L. Dissolution: 60 min in deionised water at 5 g/L, 25°C. ChinaPAM screens supply routes for the SH duty position. Contact us to confirm applicable grade-level TDS/MSDS and the relevant batch COA.
Dosage Guide
Anionic polymer demand for raw water clarification and tailings duty is established by jar test on the target stream. Make up at 1 to 3 g/L and allow full ageing before dosing. Use your current AN 910 active dose rate as the starting reference.
Frequently Asked Questions — FLOPAM AN 910 Equivalent — Low-Charge Anionic Polyacrylamide
I use plain AN 910 with no suffix. Which molecular weight tier applies to me?
The bare AN 910 number has its own entry in the SNF 2007 anionic powder catalogue (p.39) as a Low-charge, Standard molecular weight grade — it is not a shorthand for the VHM or SH variants. If your bags carry no suffix, the Standard entry is the reference point. Send us the full grade string as it appears on your delivery note or specification sheet, along with the duty and make-up equipment, and we can confirm the right molecular weight tier by jar test on your stream.
What is the practical difference between bare AN 910, AN 910 VHM and AN 910 SH?
All three are Low charge. The suffix moves molecular weight: bare AN 910 is Standard MW (700 cps at 5 g/L, 60 min dissolution); AN 910 VHM is Ultra High MW (1,200 cps at 5 g/L, 90 min dissolution); AN 910 SH is Very High MW (950 cps at 5 g/L, 60 min dissolution). Higher molecular weight means more viscous make-up solution and, for VHM, more agitation time. Send your full grade string including the suffix so we can work from the correct catalogue entry.
What make-up concentration do you recommend?
For the AN 910 duty range we recommend 1 to 3 g/L as a working make-up concentration; maximum is 5 g/L. Allow full dissolution before dosing — undissolved granules will pass through the dosing pump without contributing to flocculation and can foul screens. The SNF published maximum for this grade family is 10 g/L, but at that concentration solution handling becomes difficult for most plant dosing systems.
Why does SNF publish the bare number and the suffixed grades separately?
Because they are different products. The bare AN 910 (Standard MW), AN 910 VHM (Ultra High MW) and AN 910 SH (Very High MW) appear in three separate tables in the SNF catalogue, with different Brookfield readings and dissolution times. Two bags both labelled AN 910 but with different suffixes — or no suffix at all — are not the same product for dosing or equipment sizing purposes.
What documentation do you provide?
Every shipment includes grade-level TDS and MSDS plus a batch-specific Certificate of Analysis. Jar test protocol guidance is included with trial samples.
Related Products
Trademark notice. SNF FLOPAM AN 910 and all other third-party product and brand names on this page are trademarks or registered trademarks of their respective owners. Henan Jinghua New Material Technology Co., Ltd. is not affiliated with, endorsed by, sponsored by or authorised by those owners, and no such relationship is implied. Those names are used here for the sole purpose of identifying the products our grades are compared against, which is necessary to describe what we supply. Our products are independently manufactured and are not licensed copies. Grade descriptors quoted for third-party products are taken from each manufacturer’s own published literature and follow that manufacturer’s own scale; we do not publish figures those manufacturers do not publish. Performance on your process should be confirmed by jar test or CST test before any change of supply.