FLOPAM FO 4115 Family Equivalent: Low-Charge Cationic PAM Supply Route
ChinaPAM supplies low-charge cationic PAM powder for FLOPAM FO 4115 family purchasing inquiries. C8008 is our named starting grade at Low charge and Medium molecular weight on the ChinaPAM scale. The exact suffix still matters: the historical SNF family moves from Standard to High and Very High molecular-weight bands, while SEP and PWG also carry a separate documentation question. Send the complete grade or a bag-label photo to receive current pricing and sample options; process details can follow.
Supply Route Comparison
Published reference data and the ChinaPAM route for SNF FLOPAM FO 4115 / FO 4115 SH / FO 4115 SSH / FO 4115 SEP / FO 4115 PWG
Competitor reference: SNF SAS Catalogue 2007 Poudres, pages 5, 7, 11 and 25. The cited values are historical, indicative figures measured under SNF's stated conditions, not current contractual specifications; manufacturer descriptor scales are not calibrated to one another. Page 25 describes the SNF SEP/PWG entries for drinking-water production and does not establish any ChinaPAM qualification.
| Parameter | ChinaPAM Supply Route | SNF FLOPAM FO 4115 / FO 4115 SH / FO 4115 SSH / FO 4115 SEP / FO 4115 PWG |
|---|---|---|
| Bare FO 4115 profile | C8008 starting route: Low charge / Medium molecular weight on the ChinaPAM scale | Very Low charge / Standard molecular weight; approximately 60 / 20 / 5 cps at 5 / 2.5 / 1 g/L (SNF 2007 p11) |
| FO 4115 SH profile | C8008 same-type screening route; the molecular-weight bands differ | Very Low charge / High molecular weight; approximately 120 / 50 / 20 cps at 5 / 2.5 / 1 g/L (SNF 2007 p7) |
| FO 4115 SSH profile | C8008 same-type screening route; the molecular-weight bands differ | Very Low charge / Very High molecular weight; approximately 180 / 50 / 20 cps at 5 / 2.5 / 1 g/L (SNF 2007 p5) |
| FO 4115 SEP / PWG profile | C8008 may enter technical screening; ChinaPAM documentation and acceptance must be confirmed for the buyer's market | Very Low charge / High molecular weight; approximately 120 / 50 / 20 cps at 5 / 2.5 / 1 g/L in a drinking-water-production table (SNF 2007 p25) |
| Historical SNF make-up | Use ChinaPAM instructions below for C8008 | Bare, SH, SEP and PWG: 5 g/L recommended, 10 g/L maximum, 120 min; SSH: 5 g/L recommended, 10 g/L maximum, 150 min in DI water at 5 g/L and 25°C (SNF 2007 pp5, 7, 11, 25) |
| ChinaPAM make-up | 1–3 g/L recommended, 5 g/L maximum, dissolution within 60 min at working concentration | Historical SNF conditions are shown for identification and equipment review, not as ChinaPAM instructions |
Specifications
| Primary supply grade | C8008 |
| Our polymer | Cationic PAM powder |
| Our charge band | Low (ChinaPAM scale) |
| Our molecular-weight band | Medium (ChinaPAM scale) |
| Route status | Same-type screening; suffix and duty confirmed before sampling |
| SEP / PWG gate | Required drinking-water documents and market acceptance confirmed separately |
| Our recommended make-up | 1–3 g/L |
| Our maximum make-up | 5 g/L |
| Our dissolution | ≤60 min at working concentration |
Key Features
- C8008 named low-charge cationic powder starting route
- Bare, SH, SSH, SEP and PWG identities retained before quotation
- Technical selection and drinking-water documentation handled as separate decisions
Applications
- Alternative supply screening for buyer-specified FLOPAM FO 4115 family duty
- Make-up and dosing-system checks during an incumbent low-charge cationic polymer changeover
- Technical screening for SEP or PWG inquiries after the buyer states the required drinking-water documents and market approvals
Get a Quote for SNF FLOPAM FO 4115 / FO 4115 SH / FO 4115 SSH / FO 4115 SEP / FO 4115 PWG Alternative Supply
Start with the grade name, a bag-label photo or your purchasing requirement. We can discuss current pricing and sample options now; process details can follow.
Related Articles
Five FO 4115 identities, one suffix check
The 2007 SNF powder catalogue lists bare FO 4115 on page 11 at Very Low charge and Standard molecular weight, with indicative Brookfield readings of 60 / 20 / 5 cps at 5 / 2.5 / 1 g/L. The historical make-up entry is 5 g/L recommended, 10 g/L maximum and 120 minutes in deionized water at 5 g/L and 25 degrees C.
FO 4115 SH is a separate page 7 entry at Very Low charge and High molecular weight, with a 120 / 50 / 20 cps profile and the same 5 g/L recommended, 10 g/L maximum and 120-minute conditions. FO 4115 SSH on page 5 moves to Very High molecular weight, reports 180 / 50 / 20 cps and extends the historical dissolution entry to 150 minutes under the stated SNF conditions.
FO 4115 SEP and FO 4115 PWG appear as separate suffixes in the page 25 table for drinking-water production. Each row is Very Low charge / High molecular weight, 120 / 50 / 20 cps, 5 g/L recommended, 10 g/L maximum and 120 minutes under the stated SNF conditions. Shared figures do not make SEP and PWG interchangeable grade names.
C8008 is the named technical starting route
C8008 is the only Low-charge cationic powder in the current 26-grade ChinaPAM table and is listed at Medium molecular weight on our scale. It is the named starting route for FO 4115 family inquiries. The incumbent catalogue uses Very Low charge and assigns different molecular-weight bands by suffix, so the labels do not prove a numerical or performance match between manufacturers.
Prepare C8008 at 1–3 g/L, never above 5 g/L, and allow up to 60 minutes for dissolution at working concentration. Keep these ChinaPAM instructions separate from the historical SNF conditions. Establish treatment dose on the buyer's actual feed and compare measured polymer delivery rather than stock-solution volume alone.
Failure modes to control before changing supply
Suffix loss: treating FO 4115 SSH as bare FO 4115 can hide the incumbent's Very High molecular-weight position and its 150-minute historical dissolution reference. Incomplete incumbent preparation can look like a polymer mismatch. Record the full label, then check residual particles, solution uniformity and pump delivery before ranking the trial.
Charge drift while chasing chain length: selecting a higher-charge ChinaPAM grade only because it carries a higher molecular-weight band moves away from the FO 4115 family's Very Low historical charge position. A sharp dose optimum, deteriorating clarity after a small dose increase or floc restabilization are warnings; return to the C8008 route and compare at matched delivered polymer mass.
Documentation transfer: the SNF 2007 page 25 heading supports the historical context of FO 4115 SEP and PWG. It does not certify C8008 for drinking-water production and does not prove that a document or approval accepted for one supplier, suffix, jurisdiction or use transfers to another. State the destination market and required document set before quotation; we will confirm what is applicable to the ChinaPAM offer.
Get the FO 4115 route quoted
Send FO 4115, FO 4115 SH, FO 4115 SSH, FO 4115 SEP or FO 4115 PWG exactly as printed on the bag, or send a label photo and purchasing quantity. We can discuss the C8008 route, current pricing and sample options first. For SEP or PWG, include the destination market and required drinking-water documentation so the technical route and document gate are answered separately.
Dosage Guide
Prepare C8008 at 1–3 g/L, maximum 5 g/L, and allow up to 60 minutes for dissolution at working concentration. Make-up concentration is separate from treatment dose. Compare on the actual feed at matched delivered polymer mass and record clarity, floc response to shear and the relevant dewatering endpoint.
Frequently Asked Questions — FLOPAM FO 4115 Family Equivalent: Low-Charge Cationic PAM Supply Route
What can ChinaPAM supply for a FLOPAM FO 4115 family inquiry?
ChinaPAM supplies low-charge cationic PAM powder and names C8008 as the starting route for FO 4115 family screening. C8008 is Low charge / Medium molecular weight on our scale. Send the exact suffix because the historical SNF family moves from Standard to High and Very High molecular-weight bands.
Why does the complete FO 4115 suffix matter?
Bare FO 4115, SH, SSH, SEP and PWG are distinct entries. In the 2007 SNF catalogue, bare is Standard molecular weight, SH and SEP/PWG are High, and SSH is Very High; SSH also carries a 150-minute historical dissolution reference rather than 120 minutes. The suffix determines what must be compared.
Does the FO 4115 SEP or PWG listing qualify C8008 for drinking-water production?
No qualification transfers from that listing. The historical SNF catalogue places its SEP and PWG entries in a drinking-water-production table. A ChinaPAM offer requires its own applicable documents and acceptance for the destination market and intended use, confirmed separately from the technical C8008 screening route.
What should I send for pricing and a sample?
Send the complete grade string or a bag-label photo plus the purchasing quantity. We can discuss the C8008 route, current pricing and sample options immediately. For SEP or PWG, also state the destination market and required drinking-water documents.
Trademark notice. SNF FLOPAM FO 4115 / FO 4115 SH / FO 4115 SSH / FO 4115 SEP / FO 4115 PWG and all other third-party product and brand names on this page are trademarks or registered trademarks of their respective owners. Henan Jinghua New Material Technology Co., Ltd. is not affiliated with, endorsed by, sponsored by or authorised by those owners, and no such relationship is implied. Those names are used here for the sole purpose of identifying the products our grades are compared against, which is necessary to describe what we supply. Our products are independently manufactured and are not licensed copies. Grade descriptors quoted for third-party products are taken from each manufacturer’s own published literature and follow that manufacturer’s own scale; we do not publish figures those manufacturers do not publish. Performance on your process should be confirmed by jar test or CST test before any change of supply.